CNC Machine Build Logs Page 1 >> Page 2 >> Page 3 >> Page 4 >> Page 5 >> Page 6 >> Page 7 >> Page 8 >> Page 9 >> Page 10
This 5-axis CNC machine is an absolute monster. What you see in the picture below is just the machine’s router. The entire picture is just too big to fit on this page. It’s definitely something worth checking out.
____________________________________________________________________
This CNC is build from the parts of an old printer. Looks like a pretty elaborate setup. The link goes through the build process in great detail.
____________________________________________________________________
This CNC is made from MDF and uses the almighty skateboard bearing as the mechanism for the linear slides.
____________________________________________________________________
Here is a quick overview of a desktop CNC machine build from MDF.
____________________________________________________________________
____________________________________________________________________
Here is a build log for a CNC laser. The goal of the project was to build one for under $1000. There is TON of info at the link if you look for it.
____________________________________________________________________
Here is a nice desktop CNC machine good for PCB milling. It looks like a well documented build.
____________________________________________________________________
There isn’t a lot of info about this CNC build, but there is a lot of good pictures and a couple of videos to make up for it.
____________________________________________________________________
Here is a neat desktop sized CNC machine. Not a whole lot of information on it, but still worth a look. Note: The original page is in Italian but has been translated by Google into English.
____________________________________________________________________
Here is a pretty awesome CNC machine. The guy who built it has in fact built several different CNC machines (at least I think their from the same guy). You can see all of them at this link. Note: The original page is in Italian but has been translated by Google into English.
____________________________________________________________________
This desktop CNC is built using plastic, basic hardware, and stepper motors swiped from a printer. It’s a pretty detailed build log with the intention of helping you make one of your own.
CNC Machine Build Logs Page 1 >> Page 2 >> Page 3 >> Page 4 >> Page 5 >> Page 6 >> Page 7 >> Page 8 >> Page 9 >> Page 10
